Archery Targets for Bowhunting Practice (bag, foam block, 3D animal, broadhead-rated, and replacement cores/covers)
How each target type stops an arrow
A bag target is a fabric or woven-poly shell packed with shredded foam, fiber or plastic. The arrow pushes through loose filling and the friction of the packing stops it. A foam block is built from layers of dense closed-cell foam, often polyethylene, stacked and compressed so the shaft is gripped along its length. A 3D animal target is a molded foam body, usually a deer, with a scoring-ring or vital-zone insert and often a replaceable core in the chest area.
The fourth category, broadhead-rated, is a rating rather than a shape. It shows up on blocks, some bags and some 3D cores. It means the maker designed the stopping medium to take the wider cutting diameter of a broadhead, either by using tighter foam or by adding a dedicated insert. Check what the rating applies to: some 3D animals are rated for broadheads only in the replaceable core, while the body is for field points.
Match the speed rating to your bow and arrow
Manufacturers rate targets by maximum arrow speed in feet per second (fps). Compare that figure against your real arrow speed, not the speed printed on the bow’s box. Your speed depends on draw weight, draw length, arrow weight in grains and how heavy a point or broadhead you shoot. Heavier hunting arrows often run slower than a light target arrow from the same bow, but they carry more kinetic energy and push deeper.
Crossbows deserve their own check. A bolt is short, heavy and fast, and it can punch through a target or bury so deep that pulling it takes effort. Look for a target that states crossbow compatibility, not just a compound bow rating. A thin bag with loose filling is the usual failure: the bolt goes through the shell and sticks out the back, which is also a safety problem for whatever sits behind it.
If your speed is near or above the stated limit, step up to a thicker, denser target instead of hoping the rating has margin. A target that is too thin for the bow wears out faster and lets arrows through.
Field points versus broadheads on the target
Field points are narrow and slide between foam fibers. Broadheads are different. Fixed-blade heads have cutting edges that slice foam and fabric as they enter, and they snag on the way out. Mechanical broadheads have blades that open on impact, so on a target they can open inside the foam and make the arrow much harder to pull. The blades also dull, bend or break against dense material.
Most hunters sort this out by using two targets. A bag or economy block takes everyday field-point volume. A dense, broadhead-rated block or a 3D core is kept for checking that your broadhead tune matches your field points at hunting distance. Shooting practice broadheads at the dedicated target also spares your hunting heads. Keep an arrow puller or a piece of rubber for gripping, and push the target with your other hand while you pull, so you don’t pull the arrow at an angle and bend the shaft or cut the nock end.
Bag targets: easy on arrows, rough on broadheads
A bag target is the standard choice for field-point practice. Arrows are easy to pull because the fill is loose, and most bags are light enough to hang or move. Good bags have a tight weave and layered panels in the stopping area. The trade-off is that a bag does not recover. Holes in a fabric shell open up, filling migrates or compacts, and eventually arrows begin to pass through.
Bags are the weakest option for broadheads. The blades cut the shell and shred it quickly, and the fill grabs the cutting edges. They also have limited depth, so fast compound setups and crossbows can punch through. Consider a bag if you shoot a slower setup, practice mostly with field points, and need a target you can carry. Look at the stitching and handle, whether the shell is double-layered, and whether it comes with a stated crossbow or high-speed rating before you assume it will take your setup.
Foam blocks: dense, durable, and harder to pull
Foam blocks stop arrows through compression and grip. Because the layers close back over the hole, they often last far longer than a bag with the same amount of shooting. They usually handle higher speeds and are the common choice for broadhead-rated practice. Many have a stated fps rating, and some are described as crossbow-ready.
You pay for that durability in arrow extraction. Dense foam grips the shaft and can be hard to pull, particularly with a barbed or expanded mechanical head. Weather is the other consideration: unshielded foam in direct sun can degrade, and soaked foam may stay wet. A cover or a shed keeps it in better shape. Block size matters for the shooting you do. A larger face lets you move your aiming point around and spread wear across the surface, while a smaller block is easier to carry but wears in one spot faster.
3D animal targets and replacement cores
A 3D animal target is for hunting practice more than for form drills. It lets you pick a vital zone, judge distance without a marked range, and shoot at quartering or angled shots, which is what makes it useful before a season. The body is usually a lighter foam shell with a replaceable core or insert in the vital area. Sizes vary, from compact deer shapes to larger bodies, and the weight changes how stable the target is in wind.
The core is the consumable. Replacement cores and covers extend the life of the animal body for much less than buying a new one, so before buying an animal, confirm that cores for that exact model are sold and that the core rating covers your arrow type. If the animal is rated for field points only, a broadhead will tear the core quickly, and it can damage the body around it. Many archers pair a 3D animal for field points with a separate broadhead block, and use the animal for pre-season positioning and distance work.
Backyard setup, backstop and knowing when to replace
In a backyard, the target is only half of the safety plan. Place it with a solid backstop behind it, such as a berm, a dense wall of hay bales or a thick backing, because misses and pass-throughs happen. Allow clear shooting distance, a safe area for retrieval, and check local rules on discharging a bow in a residential area. Shorter yards favor smaller blocks and bags that you can set against a backstop; a larger yard gives you room for a 3D animal at multiple distances.
Upkeep is simple. Rotate the aiming point, keep the target dry and out of sun when possible, and keep arrows from clustering so you don’t cut the same fibers repeatedly. Replace the target or core when arrows pass through, when the face dishes out or sags, when arrows suddenly become very hard to pull, or when tight groups start cutting nocks and fletching. A target that has lost its stopping depth isn’t worth saving, and a replacement core costs less than a lost arrow.
Related guides
- Bowstring Material: Dacron vs Synthetic Fiber Blends
- Choosing the Right Broadhead Grain Weight for Your Setup
- Drop-Away vs Containment Arrow Rests for Hunting Bows
- Field Points vs Practice Broadheads for Sighting In
FAQ
Can I shoot broadheads into a bag target?
It is not recommended. Broadheads shred the shell, and the filling grabs the blades, which makes extraction hard and shortens the bag’s life. A foam block or a core marked as broadhead-rated is the better choice.
Which target should I buy for a crossbow?
Look for a target that lists crossbow compatibility and an fps rating above your bolt speed. Crossbow bolts are short, heavy and fast, so thin bags can allow pass-through. A dense foam block with enough depth is generally the safer match.
How do I know when a 3D target core needs replacing?
Replace it when arrows start passing through, the core is visibly dished or hollowed out, or arrows become very hard to pull. Confirm that a replacement core is sold for your specific model before you buy the animal.