How to Choose a Bow-Mounted Hunting Quiver
Choose Arrow Capacity for the Hunt
Bow-mounted quivers commonly carry several arrows in a hood-and-gripper layout, but useful capacity is not simply the largest number available. Each extra hunting arrow adds mass away from the bow’s centerline and increases the width of the loaded package. A compact quiver can move through brush and fit inside a ground blind more easily, while additional capacity provides spare broadheads or a separate small-game arrow when that is part of the hunt.
Evaluate capacity with every slot occupied. The arrow shafts should enter and leave without forcing neighboring broadheads together, and nocks and fletching should not collide near the lower gripper. Also consider how the bow balances after one or more arrows have been removed. The side load changes during a hunt, so a setup that feels neutral only when the quiver is full may roll differently later.
Check Broadhead Hood Clearance
The hood must fully cover the cutting edges of the intended broadhead. Compare internal hood depth and width with the assembled arrow, including broadhead length, fixed-blade span, ferrule shape, and any collar or outsert. Large cut-on-contact heads can need more room than a narrow mechanical broadhead. Broadhead points should not bottom out against hard hood material or contact the blades of adjacent arrows.
Foam-filled hoods secure many fixed-blade heads by allowing the point or blades to enter an insert. Verify that the foam is intended for the chosen broadhead style, because repeated insertion can cut channels and reduce retention. Some mechanical heads should not be pushed into foam that can catch a blade or disturb the blade-retention system. Foam-free hoods avoid that interface but depend on the shaft gripper and hood geometry to prevent movement. Replace a torn insert rather than packing damaged foam around exposed blades.
Match Grippers to Arrow Diameter
The lower gripper holds the arrow shaft, not the fletching. Its rubber fingers must fit the outside diameter of the finished carbon or aluminum shaft closely enough to resist vibration without requiring excessive force. Small-diameter shafts can slip in grippers designed around larger shafts, while an overly tight gripper can make arrow removal noisy and abrupt. Some quivers include interchangeable grippers or separate channels for different shaft sizes.
Check the complete arrow length as well. The hood-to-gripper spacing should support the shaft without pressing on vanes, nocks, components, or a tapered section. Vertical adjustment can help position the gripper between the broadhead and fletching. Load the arrows with vanes facing the same way they will be carried, then verify clearance from the bowstring, cables, cable guard, arrow rest, limb, and cam through the entire draw cycle.
Verify the Mounting Interface
Most bow-mounted quivers attach through a bracket near the sight mounting area, but hole spacing, offset, and hardware vary. Confirm compatibility with the riser, sight bracket, dovetail mount, and any integrated accessory interface before buying. Long mounting bolts can protrude into an unwanted area; short bolts may not provide enough thread engagement. Use only hardware and spacers intended for the assembly.
A fixed bracket stays on the bow, while a quick-detach mount lets the hunter remove the quiver at a treestand or ground blind. Inspect how the latch locks and whether it can be operated with gloves. The detached quiver also needs a safe hanging or storage method that keeps covered broadheads away from the hunter. For a left-handed bow, verify orientation rather than assuming the hood and latch can simply be reversed. Offset and vertical adjustment are valuable when they solve actual sight, rest, or cable clearance.
Control Noise, Vibration, and Bow Torque
Loose arrows, hard contact points, and a poorly locked mounting bracket can rattle at the shot or while walking. Load each shaft and shake the undrawn bow gently in a safe area. Listen at the hood, gripper, bracket, latch, and arrow components. Rubber dampers can reduce vibration, but they cannot compensate for an undersized shaft channel or loose fastener. Confirm that broadheads do not touch one another inside the hood.
A loaded quiver shifts the bow’s center of mass toward the mounting side. A close-to-riser design reduces the lever arm, while a quiver that stands farther out may create more side roll in the bow hand. Judge balance at full draw with the arrows and broadheads actually installed. Stabilizer or side-bar changes can counter some roll, but buying a quiver with suitable offset and mass is cleaner than adding weight solely to correct an avoidable mounting problem.
Durability and Field Ownership
More money generally buys stronger lightweight materials, closer-to-bow adjustment, replaceable hood liners or grippers, and a more refined quick-detach mechanism. Those features matter only if replacement parts remain obtainable and the latch stays secure after repeated use. Inspect molded hoods for cracks, metal brackets for bending, rubber grippers for hardening or tears, and all fasteners for movement.
Before each hunt, confirm every broadhead is covered, every shaft is seated to a consistent depth, and the bracket is locked. Avoid using the quiver as a carry handle unless its maker explicitly allows it. Dry mud and plant debris can prevent full gripper engagement, while solvents can damage foam or rubber. Remove arrows before servicing the mount. A failure at the hood exposes blades; a failure at the gripper releases an arrow; and a failure at the bracket can put the entire quiver into the string or cables.
Shop bow-mounted hunting quivers
Get Bow Mounted Hunting QuiversRelated guides
- archery bowhunting equipment Budget vs Premium
- archery bowhunting equipment for Beginners
- archery bowhunting equipment Installation Basics
- archery bowhunting equipment Maintenance Checklist
FAQ
How many arrows should a hunting quiver hold?
Choose enough capacity for the hunt and any required spare or specialty arrow, without adding slots that will remain empty. Compare maneuverability and balance with the quiver fully loaded rather than judging the bare quiver.
Will one quiver fit both fixed-blade and mechanical broadheads?
Some will, but hood depth, blade clearance, foam design, and broadhead-retention method must suit both heads. Confirm that fixed blades do not touch neighboring heads and that foam cannot deploy or damage a mechanical head.
Should a bow quiver be removable while hunting?
A quick-detach quiver is useful when a treestand or blind provides a secure place to hang it. Keeping the quiver attached avoids another handling step, but the loaded bow’s side balance and clearance must remain acceptable.