Adjustable Youth and Beginner Compound Bows: Choosing by Draw Length and Draw Weight Range
Draw Length and Draw Weight: The Two Ranges That Decide Fit
Draw length is how far the string comes back at full draw. The AMO standard measures it from the nocking point to the deepest part of the grip, plus 1.75 inches. A quick starting estimate is wingspan in inches divided by 2.5, so a 60-inch wingspan points to about 24 inches. On a cam-driven compound, draw length is set by the cam or module and does not change with effort, so the bow’s documented draw length range has to include the archer’s measured length today.
Draw weight is the peak force, in pounds, needed to pull the string through the cam’s heaviest point. A growing archer needs a range that covers both now and later. An archer who can control 15 pounds at 22 inches this season may reach 26 inches and 40 pounds within a few years, so the bow’s range has to cover both points. Each spec answers its own question: draw length range is whether it fits the body, and draw weight range is whether it fits the strength.
Four Adjustable Bows and Their Published Ranges
The Genesis Original, the official bow of the National Archery in the Schools Program, takes a different approach. It has zero let-off, so it fits draw lengths from 15 to 30 inches without any adjustment, and its draw weight adjusts from 10 to 20 pounds. Genesis also lists the Genesis Mini at 6 to 12 pounds and the Gen-X at 25 to 40 pounds for archers who fall outside that window.
Get Genesis OriginalThe Bear Royale is built for small frames. Bear lists a draw length range of 12 to 27 inches, draw weight of 5 to 50 pounds, a 27-inch axle-to-axle length and an IBO speed of 290 fps. Bear’s dealers describe both draw length and draw weight changes as Allen-wrench jobs that need no bow press.
Get Bear RoyaleThe Bear Cruzer G3 covers a larger frame range on a dual cam system: 14 to 30 inches of draw length, 10 to 70 pounds of draw weight and up to 315 fps.
Get Bear Cruzer G3The Diamond Infinite 305 starts higher and ends longer: 19 to 31 inches of draw length and 7 to 70 pounds of draw weight on Diamond’s rotating module system. It leaves the factory set at 26 inches, and its rated speed is 305 fps. Because each bow is sold in right-hand and left-hand versions, check the riser hand against the archer’s dominant eye before ordering.
Get Diamond Infinite 305Module-Free vs Module-Swap Adjustment
Rotating-module bows such as the Diamond Infinite 305 change draw length by loosening the module screws, turning the module to a marked position and tightening it again. Every length in the published range stays on the bow, so a growth spurt needs a hex key, not a new part. Module-swap designs need a separate module for each length, and some cam designs need a bow press to take tension off the cam. Before buying, look in the owner’s manual for whether draw length changes require a press. That one answer decides whether you adjust at the kitchen table or wait for a shop.
Draw weight is set with the limb bolts on almost every compound. Turning them out lowers peak weight and turning them in raises it. Turn both bolts the same number of turns so the limbs stay balanced, and never go past the maximum backout the manual allows, because a loose limb pocket can let the limb shift under load. After any change, measure the result on a bow scale. Counting turns only gives an estimate.
Let-Off, Holding Weight and the Zero Let-Off Trade-Off
Let-off is how much the cam reduces the force at full draw. With 75 percent let-off, a bow peaking at 40 pounds holds at about 10 pounds, which lets a young archer stay at anchor long enough to aim. Many adjustable compounds let you change let-off through a draw stop or post position. The manual’s chart lists which positions go with which let-off figures.
The Genesis Original works the opposite way. With zero let-off, the archer holds the full 10 to 20 pounds at anchor, and that is what lets one cam fit every draw length from 15 to 30 inches. That works well for range practice and school programs. But the 20-pound ceiling and the full holding weight mean the archer will eventually need a bow with let-off and more weight.
Hunting Minimums and the Weight at Your Draw Length
Many states set a minimum draw weight for bowhunting big game, and the numbers differ, so check the current regulations with your state wildlife agency before the season. What matters is the weight the bow actually produces at the archer’s draw length, not the top of the published range. On many adjustable cams, the highest weight you can reach shrinks at the shortest draw length settings. Look up the maker’s module or timing chart for the setting your archer will use.
Every adjustment also affects the arrows. A longer draw length needs longer shafts, commonly cut 1 to 2 inches beyond the draw length so the point clears the rest. More draw weight needs a stiffer spine. If a child’s arrows were bought at 18 inches and 15 pounds, re-check them against the shaft maker’s spine chart before shooting them from a 24-inch, 35-pound setup.
Working Out When an Archer Outgrows Each Bow
Divide each bow’s draw length limits by the wingspan rule to see what body size it fits. The Bear Royale tops out at 27 inches, which matches a wingspan of about 67.5 inches, and at 50 pounds. A teen measuring 28 inches has outgrown it, however much weight is left. The Diamond Infinite 305 starts at 19 inches, about a 47.5-inch wingspan, so a smaller child cannot be set up on it yet. The Bear Cruzer G3 starts at 14 inches, about a 35-inch wingspan, and goes up to 30 inches.
For a new adult with a 28 to 30-inch draw, the low end matters less than having room to add weight. The point of a 7 to 70 or 10 to 70-pound range is to start light, shoot good form and then climb in small limb-bolt steps.
Upkeep Every Time the Settings Change
A module or limb-bolt change moves several other parts. Re-check that the peep sight sits at eye level at the new anchor, that the nocking point is square to the rest and that the sight pins still hold zero at 20 yards. Wax the string and cables regularly, keep the module screws snug, and never dry-fire the bow, meaning release it without an arrow. Bow makers’ warranties commonly exclude damage from dry-firing, and it can break cams, limbs or strings.
Related guides
- Archery Targets for Bowhunting Practice (bag, foam block, 3D animal, broadhead-rated, and replacement cores/covers)
- Bow Cases for Bowhunting: Hard vs Soft vs Hybrid Compound Bow Cases for Truck Travel, Airline Flights and ATV/Backcountry Transport
- Bowhunting Backpacks and Field Pack Systems
- Bowhunting binoculars and bino harness systems: compact 8x32 vs 8x42 vs 10x42 binoculars for treestand, ground-blind and spot-and-stalk hunts, matched to enclosed bino harnesses, lens covers, rain guards and cleaning kits
FAQ
Can a Genesis Original be used for deer hunting?
Usually not. The Genesis Original adjusts only from 10 to 20 pounds, and it has zero let-off. Many states’ big game minimums are above that, so check your state wildlife agency’s rule. It is built for learning form and target practice.
Is a 70-pound maximum bow safe for a 10-year-old?
The maximum is only the top of the range. A Bear Cruzer G3 or Diamond Infinite 305 can be backed down to 10 or 7 pounds with the limb bolts. Set it to a weight the child can draw smoothly without lifting the bow skyward, and confirm it on a bow scale.
How often should a growing archer’s bow be re-measured?
Re-measure draw length whenever form looks strained or the archer’s wingspan grows noticeably. During growth spurts, a check every few months is reasonable. Each change in draw length or weight also means re-checking arrow length and spine.